Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
Get rid of stubborn mustard algae fast. United Chemical Yellow Treat®² (YT2-45LB-C1) is a sodium bromide algicide that boosts your chlorine to kill yellow algae in 24 hours or less, without staining. This 45 lb pail treats about 1.4 million gallons, so it is a good buy for pool routes and large pools.
- Killing mustard (yellow) algae on walls, steps, and shaded spots.
- Clearing blooms that come back after normal shocking.
- Busy pool routes and commercial pools that go through a lot of product.
- Product: United Chemical Yellow Treat®² Mustard Algicide
- Size: 45 lb pail
- Active ingredient: sodium bromide (67.6%)
- Form: granular
- Dose: 5 oz per 10,000 gallons (spa: 1/4 oz per 500 gallons)
- EPA registered algicide
- Not a DOT-regulated material (per SDS)
- Chlorine and saltwater pools
- Bromine pools and spas
- White and colored plaster, exposed aggregate, fiberglass, painted, and vinyl surfaces
- Run the filter and brush the walls and steps where the yellow film is.
- Broadcast 5 oz (one level capful) per 10,000 gallons over the water.
- Brush the treated areas again right away.
- Shock the pool right after, whatever your chlorine reading is, at the shock product label rate.
- Clean or backwash the filter the next day.
Note: Always read and follow the label. Keep out of reach of children. A 45 lb pail ships by ground only.
