SwimSense | 2" LED Pool Light, 100ft Cord – Replaces Pentair, Hayward & Jandy
Couldn't load pickup availability
CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov
Light It Right. A patented, color-changing LED pool light engineered for maximum heat dissipation — delivering 900 lumens, a 30,000-hour lifespan, and universal compatibility with Hayward, Pentair, and Jandy systems.
Doesn’t Burn Out. Heat is why pool lights fail early. SwimSense’s patented stainless steel heatsink continuously circulates cooler pool water over the LED core through patented cooling grooves — keeping operating temperatures up to 40% lower than standard lights for a dramatically longer lifespan.
Compact Form. The Aqua-Colors delivers a full 900 lumens — the brightness of larger fixtures in a compact 2″ form. Paired with a precision lenticular lens, output is evenly distributed across the pool floor and walls for uniform brightness from edge to edge across 350 sq. ft. with no hot spots or dim corners.
- 900 lumens — full brightness of a larger fixture in compact 2″ form
- Lenticular lens for balanced beam geometry across 350 sq. ft.
- Maintains 90%+ luminous output after 30,000 hours
- Low energy draw with full-fixture brightness output
Every System. Easily switch between P, J, and H modes to match your existing brand — fixed colors and preset color shows, all controlled from your existing pool automation system.
Every System. The Aqua-Colors is engineered to fit commercially available 2″ niche fittings in Gunite, Fiberglass, and Vinyl pools. With a 100 ft cord, it connects directly to your existing Hayward, Pentair, or Jandy system without rewiring. Synchronizes to and controlled from industry-standard equipment.
- Fits commercially available 2″ niche fittings
- Gunite, Fiberglass, and Vinyl pool compatible
- 100 ft cord — no rewiring required
- Synchronizes to industry-standard pool automation equipment
- Replace only the failed light — sync with your existing lights
Yes. The Aqua-Colors uses a standard 2″ niche fitting and is engineered to fit commercially available fittings in Gunite, Fiberglass, and Vinyl pools. It installs without rewiring and synchronizes to industry-standard pool automation equipment. For color syncing, use P mode for Pentair, J mode for Jandy, and H mode for Hayward ColorLogic.
The Aqua-Colors uses a patented stainless steel heatsink with cooling grooves that guide cooler pool water upward from the bottom of the fixture and circulate it naturally over the heatsink surface. This keeps LED operating temperatures up to 40% lower than standard lights — extending lifespan and maintaining over 90% brightness after 30,000 hours. Heat is the primary cause of premature pool light failure.
Yes. Select the correct P, J, or H mode to match your existing brand and the Aqua-Colors will sync with your remaining lights. This eliminates the expensive scenario of replacing the entire lighting system because one unit failed.
Yes. The Aqua-Colors is available with either a 100 ft or 150 ft wire. If your pool configuration requires extra cord length, the 150 ft option ensures you have sufficient reach without splicing or extending.
Yes. The Aqua-Colors synchronizes to and is controlled from industry-standard pool automation equipment. It integrates with major pool automation systems, allowing color and show mode control through your existing app exactly as your original light did.
Questions & Answers
Have a Question?
Be the first to ask a question about this.