Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
The Swimables SW-26-019 is an aftermarket holding wheel assembly for Pentair Purex SM and SMBW 2000 and 4000 series DE filters. It replaces OEM Pentair part 071019Z. The stainless-steel wheel secures the top of the DE grids.
- Replacing a worn, bent, or missing holding wheel on a compatible Purex 2000 or 4000 series DE filter.
- Keeping the filter grids under the correct tension at the top of the assembly.
- Part number: SW-26-019
- Brand: Swimables (aftermarket)
- Replaces: Pentair 071019Z
- Type: holding wheel assembly
- Construction: stainless steel
- UPC: 810108826088
- Pentair Purex SM and SMBW 2000 and 4000 series DE filters, including models commonly listed as 2024–2072 and 4024–4060 (such as 4024, 4036, and 4048).
- This is the Swimables aftermarket replacement, not the genuine Pentair 071019Z. Confirm your filter model before ordering.
- Turn off the pump and relieve tank pressure, then open the filter per the manufacturer's instructions.
- Remove the old holding wheel and install the SW-26-019 so it seats on the top of the grid assembly.
- Reassemble the tank and check for leaks before returning the system to service.
Note: This is a Swimables aftermarket part that replaces 071019Z. It is not the genuine Pentair OEM holding wheel.
