Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
The S.R. Smith U-Frame is a stainless steel diving board stand set: two U-shaped legs (fulcrum and heel) made of 1.90" OD, .049" wall stainless steel tubing, with a slip-on rubber fulcrum.
What you need with this stand
| Fits | S.R. Smith Fibre-Dive and Frontier III boards. 18″ (UF-18-101) for 6′ and 8′ boards, 24″ (UF-24-103) for 10′ boards. |
| In the box | Both stainless steel legs (1.90″ OD) and the slip-on rubber fulcrum. Board sold separately (its bolts come with it). |
| Install | Legs are set in new concrete at least 6″ thick. Not recommended for salt pools. |
| Replacing a board later | Put on a new 20″ rubber fulcrum cover (FC-200A-R) with every new board. |
Part numbers: UF-18-101 (18"), UF-24-103 (24")
Specifications
| Model | S.R. Smith U-Frame (UF-18-101, UF-24-103) |
| Sizes | 18″ for 6′ and 8′ boards; 24″ for 10′ boards |
| Tubing | 1.90″ OD, .049″ wall, 304 stainless |
| In the box | Both legs + slip-on rubber fulcrum |
| Fits boards | Fibre-Dive, Frontier III (TrueTread too) |
| Shipping | 18″: 33″ × 25″ × 2″, 16 lb; 24″: 34″ × 31″ × 2″, 16 lb |
| Install | Legs set in new concrete at least 6″ thick |
| Salt pools | Not recommended |
Downloads
📄 S.R. Smith residential diving boards & stands guide (PDF)
Install every board and stand following S.R. Smith’s instructions and your local codes.
