Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
What you need with this base
| Also needed | A Salt Pool spring assembly for your board length: 69-209-662 (6′) or 69-209-682 (8′) – color to match. |
| Board | S.R. Smith Frontier III 6′ or 8′ (sold separately; the board comes with its mounting bolts). |
| In the box | Base, 606/608 four-bolt jig, stand hardware. |
| Existing concrete deck | Add the four-bolt epoxy anchor kit 75-209-5868-SS – or bolt onto your old 606/608 Cantilever jig. |
| Note | Salt Pool bases and springs do not interchange with other S.R. Smith springs and bases. |
The S.R. Smith Salt Pool Jump Stand base is the base half of S.R. Smith’s salt-friendly jump board system – a low-profile, fiberglass-backed base made to hold up in salt-water pools. Paired with a Salt Pool spring assembly and a Frontier III board, it gives a springy jump board instead of a rigid dive stand. It is the stand S.R. Smith pairs with the Frontier III board.
Highlights
- Salt-friendly fiberglass-backed base, stainless hardware
- Includes the 606/608 four-bolt jig and stand hardware
- Can be retrofitted onto an existing S.R. Smith 606/608 Cantilever jig
- For 6′ and 8′ Frontier III boards (250 lb limit)
- Radiant White, Taupe or Pewter Gray
Part numbers: 69-209-62 (Radiant White), 69-209-610 (Taupe), 69-209-620 (Pewter Gray).
Specifications
| Model | S.R. Smith Salt Pool Jump Stand base |
| Part numbers | 69-209-62 White, 69-209-610 Taupe, 69-209-620 Pewter Gray |
| In the box | Base, 606/608 four-bolt jig, stand hardware |
| Needs | Salt Pool spring assembly 69-209-662 (6′) / 69-209-682 (8′) |
| Fits boards | Frontier III 6′ and 8′ |
| Weight limit | 250 lb |
| Shipping | 25″ × 20″ × 11″, 27 lb |
| Concrete | Slab at least 8′ long, 4′ wide, 6″ thick |
| Salt pools | Yes – made for them |
Downloads
📄 S.R. Smith residential diving boards & stands guide (PDF)
Install every board and stand following S.R. Smith’s instructions and your local codes.
