Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
Who needs this
| Needed when | Putting a Frontier II spring stand on an existing concrete deck (no jig in the deck). |
| What it does | Three stainless 6″ × 5/8″ bolts are epoxied into drilled holes instead of a jig cast in new concrete. |
| Skip it if | You bolt the stand onto an existing Frontier II jig. |
Use this S.R. Smith epoxy kit to mount a Frontier II diving board spring stand on an existing concrete deck, instead of the jig that is set in new concrete. Also used to repair loose stand anchors.
- Fits: S.R. Smith Frontier II spring stands (6' and 8').
- Includes: epoxy resin, hardener and the stainless steel mounting bolts.
- New concrete deck? You do not need this kit: use the jig that comes with the stand.
Part number: 75-209-5869-SS
Specifications
| Part | 75-209-5869-SS |
| For | Frontier II spring stand on existing concrete |
| Contents | 3 stainless bolts 6″ × 5/8″ + epoxy |
Downloads
📄 S.R. Smith residential diving boards & stands guide (PDF)
Install every board and stand following S.R. Smith’s instructions and your local codes.
