Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
A water-based acrylic pool paint for a fast, easy repaint. Ramuc DS is a self-priming acrylic coating that goes on over most existing surfaces - bare or previously painted concrete, plaster, and gunite, and even over existing rubber-based or acrylic paint. Because it is water-based, it has low odor, cleans up with water, dries quickly, and lets you refill the pool within about 3 days of the final coat. This is the Royal Blue, 1 gallon can.
- Repainting concrete, plaster, and gunite swimming pools.
- Recoating pools previously finished with acrylic or rubber-based paint.
- A quick-turnaround option with minimal downtime.
- Water-based acrylic - low odor and easy water cleanup.
- Self-priming; no separate primer coat required on most surfaces.
- Fast drying - refill the pool in about 3 days after the final coat.
- UV-resistant color and chlorine resistance for a lasting finish.
- Color: Royal Blue. Size: 1 gallon.
- Approximately 350-400 sq. ft. per gallon on smooth surfaces; a porous first coat may cover less. Two coats recommended.
- Clean and prep the surface: remove dirt, oils, and loose paint; acid-etch bare concrete or plaster, then rinse and let dry.
- Apply thin, even coats with a roller or brush when the surface and air are dry.
- Let each coat dry per label directions; apply a second coat for best results.
- Allow the final coat to cure, then fill the pool (about 3 days).
Tip: pair with a compatible surface cleaner/etch for proper adhesion on bare or glossy surfaces.
