Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
Ramuc ADC Acrylic Deck Coating 1 Gal - Cayman Sand | 940225601
Shipping times are estimates, not guarantees.
Couldn't load pickup availability
Have a question about this part?
Ask about fit, specs or shipping and get an instant answer.
Goes with this part
Manuals & documents
- Ramuc Acrylic Deck Coating Product Data Sheet PDF · 646 KB View PDF
CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov
Give a worn concrete pool deck a fresh, even color. The Ramuc ADC Acrylic Deck Coating in Cayman Sand (940225601) is a 1-gallon, water-based coating that leaves a safe, non-slip matte finish on textured concrete decks and patios. It is self-priming, cleans up with soap and water, and the deck is back in use in 48 hours.
- Recoating and recoloring textured concrete pool decks and patios.
- Restoring bare or previously painted concrete.
- Adding a non-slip finish to high-traffic areas around the pool.
- Also works on bare fiberglass and sound painted surfaces with the right prep.
- Fast dry formula - recoat in 4 hours, back in service in 48 hours.
- Self-priming, one component - no primer needed.
- Non-slip, flat (matte) finish that hides imperfections.
- Colorfast and UV resistant.
- Water-based with soap-and-water cleanup.
- VOC compliant in the US and Canada.
- Product: Ramuc ADC Acrylic Deck Coating, Cayman Sand
- Size: 1 gallon
- Coverage: 170 sq. ft. per gallon at 4.0 mils
- Coats: 2 (2 mils dry per coat)
- Finish: flat
- Working time: 30-45 minutes at 75 F
- Recoat time: 4 hours
- Return to service: 48 hours
- Application temperature: 50 F min / 90 F max (surface and air)
- VOC: 190 g/L (as supplied)
- Solids: 42% by volume, 61% by weight
- Flash point: over 200 F
- Shelf life: 3 years; store indoors at 60-100 F
- Clean the deck so it is free of dirt, loose paint, oil, grease, wax, and soap. Concrete must be fully cured.
- Porous concrete needs no more prep. Smooth (non-porous) concrete must be acid etched with Ramuc Clean & Prep Solution, sanded, or shot blasted. Rinse off all acid with soap and water and let it dry.
- Patch cracks with Ramuc Epoxy Patching Compound and flexible joint filler. Do not use silicone repair products.
- Do not prime. Mix well. If you use more than 1 gallon, box (intermix) the gallons together for even color.
- Apply 2 coats with a brush, a roller no thicker than 3/8 in. (mohair or lambskin), or a sprayer. Wait 4 hours between coats and do not go heavier than 8 wet mils.
- Apply between 50 F and 90 F. Do not apply above 90% humidity, when rain is coming, or late in the day (dew). Keep it at 40 F or warmer for 8 hours after.
Size: 1 gallon - covers about 170 sq. ft. per coat at 4 mils. Plan on 2 coats. Clean & Prep Solution, patching compound, and roller sold separately. Color may vary slightly from the swatch shown.