Find your parts diagram
PoolmartP1G269

Poolmart Pro Series Phosphate Remover Max+ 1 Gallon - Concentrated | P1G269

$89.99
$107.99 $89.99
-$18.00
Shipping calculated at checkout.
Free shippingOr free pickup
Fast processingMost orders ship in 1–2 business days
Typical delivery3–7 business days after shipping

Shipping times are estimates, not guarantees.

● 55 in stock30-day returns Secure checkout

CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov

Poolmart · Pro Series · 1 Gallon Crystal clear
starts here. Pro Series Phosphate Remover Concentrated Max+ is formulated for professional use and removes phosphates on contact, so your chlorine can get back to keeping the water clean.
Concentrated Max+ Removes Phosphates on Contact Helps Prevent Algae Growth Made in USA
Why It Matters
Treatment being poured into crystal-clear pool water
Why Phosphates Matter Less Phosphate.
Less Work for Chlorine. Phosphates feed algae, and high levels make your chlorine work harder. Clear them out and your sanitizer does more with less. That’s the whole idea behind keeping phosphates low.
  • Removes phosphates on contact
  • Helps prevent algae growth
  • Lets your sanitizer do more with less
  • For best results, keep phosphate levels below 500 ppb
Pro Strength
Pro Series · 1 Gallon Professional Strength.
Gallon Size. Concentrated Max+ is formulated for professional use. The 1 gallon jug has a built-in handle and a screw cap, and you measure each dose in ounces straight from the dosage chart.
  • Concentrated Max+ formula
  • Net contents: 1 gallon
  • Doses from 2 oz to 8 oz, based on your phosphate test
  • Made in USA. Rinse the empty bottle thoroughly and recycle.
Poolmart Pro Series Phosphate Remover Concentrated Max+ 1 gallon jug on a sunny pool deck
On the Label
Crystal Clear · Healthy Water Three Jobs.
One Pour. Straight from the back of the jug: what Concentrated Max+ is built to do.
Removes Phosphate Formulated to remove phosphates on contact.
Helps Prevent Algae Growth Keep phosphates below 500 ppb and test regularly.
Fast Acting Formula Run your filtration 24 to 48 hours after treating, then retest.
How to Use
Four Steps to Clear Water Directions from the label.
1 Prep the Pool Make sure all water levels are in the proper range and the filter is freshly cleaned or backwashed.
2 Add & Spread Add to the water using the dosage chart. Apply evenly over as much of the pool surface as possible.
3 Filter 24–48 Hours Run the filtration system for 24 to 48 hours. Water may turn cloudy or milky when phosphate levels are high. Do not swim while the water is cloudy. If filter pressure rises 10 PSI, clean or backwash the filter.
4 Clean & Retest After 48 hours, clean or backwash the filter again and retest the water. Reapply if needed.
Dosage Chart
Dosage Chart
Phosphate Level
Amount to Add
0–600 ppb
2 oz
600–1,200 ppb
4 oz
1,200–2,000 ppb
7 oz
Over 2,000 ppb
8 ozThen retest & repeat
Test your water first, then add the amount shown for your phosphate level. Retest after treatment and treat again as needed.
Pro Tip
Poolmart Pro Series Phosphate Remover 1 gallon jug standing in clear aqua water
Pro Tip High phosphates make chlorine work harder. Clear them out and your sanitizer does more with less. For best results, maintain phosphate levels below 500 ppb. Test regularly and treat as needed.
  • Target: below 500 ppb
  • Test regularly
  • Treat as needed, using the dosage chart
At a Glance
Specifications Poolmart Pro Series Phosphate Remover Concentrated Max+ · 1 Gallon
1 galNet Contents
2–8 ozDose per Chart
24–48 hrFiltration Run
<500 ppbPhosphate Target
Brand
Poolmart
Line
Pro Series
Product
Phosphate Remover Concentrated Max+
Size
1 Gallon
Active Ingredient
Lanthanum Chloride
Form
Liquid Concentrate
Dosing
2 / 4 / 7 / 8 oz by Phosphate Level
Use
Formulated for Professional Use
Made In
USA
Container
Rinse Thoroughly and Recycle
UPC
650429312002
SKU
P1G269
Questions
Frequently Asked Straight answers from the label.

Water may turn cloudy or milky when phosphate levels are high. Keep running the filtration system for 24 to 48 hours. If filter pressure rises 10 PSI, clean or backwash the filter.

Do not swim while the water is cloudy. Run the filtration for 24 to 48 hours, then after 48 hours clean or backwash the filter again and retest the water.

Test your phosphate level and follow the dosage chart: 2 oz for 0–600 ppb, 4 oz for 600–1,200 ppb, 7 oz for 1,200–2,000 ppb, and 8 oz for over 2,000 ppb, then retest and repeat. Apply evenly over as much of the pool surface as possible.

If filter pressure rises 10 PSI while you run the filtration, clean or backwash the filter. After 48 hours, clean or backwash it again.

Retest the water 48 hours after treating, and reapply if needed. For best results, maintain phosphate levels below 500 ppb. Test regularly and treat as needed.

Safety & First Aid Keep out of reach of children
First Aid

If in eyes rinse with water. Remove contacts if worn and continue to rinse thoroughly. Call a doctor if irritation persists. On skin: Wash thoroughly with plenty of water.

If Swallowed

Contact a doctor immediately. Contains Lanthanum Chloride. If conscious, consume large quantities of water or milk.

When empty rinse bottle thoroughly and recycle. · Made in USA