The HDFS275 is the 275K BTU model in Hayward's Universal HC Series dual fuel gas heaters with OmniX. It is built for tight equipment pads: the base is 21 in. x 21 in. and the back can sit against a wall with no clearance, so it fits where a wider heater will not.
One heater covers both fuels. It ships set up for natural gas, and the parts to convert it to propane come in the box. The top comes off with a single fastener and can be reversed to move the plumbing from right to left, and all service is done from the top.
OmniX is built in for programming and diagnostics, and the universal display works with Hayward Omni and OmniX automation and with other brands' controllers.
Natural gas or propaneShips set up for natural gas. Propane conversion uses the mixer and label packed with the heater, installed by a qualified service agency.
Smallest footprint21 in. x 21 in. base with zero clearance at the back, for pads where a standard heater does not fit.
OmniX built inProgramming, diagnostics and remote connection are part of the heater. Phone control from anywhere needs the OmniX Gateway, sold separately.
Top-access serviceNo side panels to remove. The reversible top swaps the plumbing side and gives access to the gas shutoff and voltage selection.
Cupro-nickel heat exchangerStandard. Hayward uses it to resist corrosion and early wear when water chemistry drifts.
Specs
Gas input275,000 BTU/hr
FuelNatural gas or propane (field convertible)
Thermal efficiency84%
Minimum water flow25 GPM
Maximum water flow125 GPM
Water connections2 in. x 2-1/2 in.
Gas connection at heater3/4 in.
Gas inlet pressure4.0 to 14.0 in. w.c., natural gas or propane
Electrical120 or 240VAC, 60 Hz, single phase, 5.5 A maximum (factory wired for 240V)
IgnitionSilicon nitride hot surface igniter, pre-mix combustion
Heat exchangerCupro-nickel
Heater size28 in. wide x 21 in. deep x 31 in. high
Heater weight131 lb
Footprint21 in. x 21 in.
ClearancesBack 0 in., front 18 in., water connection side 12 in., opposite side 6 in.
InstallationOutdoor or indoor
Remote control2-wire, 3-wire, or RS485 with Omni
EmissionsLow NOx
Works with
Hayward Omni and OmniX automation
Other brands' automation systems through the universal display or a 2-wire / 3-wire remote
OmniX app for phone control, with the OmniX Gateway (sold separately)
Warranty and installation
WarrantyHayward warranty: 3 years parts, 1 year labor. Claims go to Hayward.
InstallationProfessional installation available in LA and Ventura County
Questions
Is it natural gas or propane?Both. The heater ships set up for natural gas. The parts to convert it to propane are packed with the heater, and the conversion has to be done by a qualified service agency.
Can I control it from my phone?Yes, with the OmniX app. Control from anywhere needs the OmniX Gateway, which is sold separately.
How much room does it need?The base is 21 in. x 21 in. Hayward lists 0 in. clearance at the back, 18 in. in front, 12 in. on the water connection side and 6 in. on the opposite side. With vinyl siding behind the heater, Hayward says to leave 12 in.
Can it go indoors?Yes. Hayward lists it for outdoor or indoor installation. Indoor installs need the venting and combustion air described in the manual.
What pump flow does it need?At least 25 GPM through the heater, and no more than 125 GPM. The bypass is built in.
What is the other size?The HDFS400 is the 400,000 BTU model in the same cabinet.
We'll email you back, usually the same business day. Or call (818) 818-6559 (Mon–Fri 8–5, Sat 8–4).
You are chatting with an AI assistant, not a person. It can be wrong: please double-check part numbers against your equipment label. By using this chat you agree that it is recorded and saved, that it is processed by our service providers, and that our team may read it or join. See our Privacy Policy. Need a person? or call (818) 818-6559.