The HS200FDP is the 200K BTU propane model in Hayward's Universal H-Series gas heaters with OmniX. Hayward sizes it for pools up to about 600 sq ft of surface area. It heats pool or spa water on demand, so it is the usual choice when you want the water warm quickly rather than held warm all season.
Service is done from the front panel only, the electrical junction box can go on the left or the right, and the water connections are standard 2 in. x 2-1/2 in. unions, which makes it a straightforward swap for an older heater. The built-in universal display works with Hayward Omni and OmniX automation and with other brands' controllers.
This model burns propane only. If your equipment pad has natural gas, the matching model is the HS200FDN.
Cupro-nickel heat exchangerStandard on every size. Hayward uses it to resist corrosion and early wear when water chemistry drifts.
OmniX built inProgramming, diagnostics and remote connection are part of the heater. Phone control from anywhere needs the OmniX Gateway, sold separately.
Front-panel serviceEverything is reached from the front, so the heater does not need service room behind it.
Works with your automationUniversal display for Omni, OmniX and other brands' systems, plus a standard RS485 connection for OmniLogic.
Specs
Gas input199,900 BTU/hr
FuelPropane
Thermal efficiency83%
Minimum water flow20 GPM
Maximum water flow125 GPM
Water connections2 in. x 2-1/2 in. unions
Gas connection at heater3/4 in.
Gas inlet pressure10.0 to 13.0 in. w.c.
Electrical120 or 240VAC, 60 Hz, single phase, 5.5 A maximum
IgnitionSilicon nitride hot surface igniter, forced draft combustion
Heat exchangerCupro-nickel
Cabinet size22 in. wide x 29-1/2 in. deep x 24 in. high
CommunicationRS485 standard
EmissionsLow NOx
CertificationCSA
Works with
Hayward Omni and OmniX automation
Hayward OmniLogic through the standard RS485 connection
Other brands' automation systems through the universal display
OmniX app for phone control, with the OmniX Gateway (sold separately)
Warranty and installation
WarrantyHayward warranty: 3 years parts, 1 year labor. Claims go to Hayward.
InstallationProfessional installation available in LA and Ventura County
Questions
What size pool is the HS200FDP for?Hayward's sizing chart puts this model at pools up to about 600 sq ft of surface area, based on a 30 degree F temperature rise, 3.5 mph average wind and elevation up to 2,000 ft. For an indoor pool, divide the surface area by 3 before picking a size.
How fast does it heat a spa?Hayward lists the time to raise spa water 30 degrees F: 200 gallons in about 18 minutes, 300 gallons in about 27 minutes, 400 gallons in about 36 minutes, 500 gallons in about 45 minutes. Heat lost to the spa walls adds to that.
Can I run it on propane?Yes. This is the propane model. For natural gas, the same size is the HS200FDN.
Can I control it from my phone?Yes, with the OmniX app. Control from anywhere needs the OmniX Gateway, which is sold separately.
What pump flow does it need?At least 20 GPM through the heater, and no more than 125 GPM. The heater has a built-in bypass.
Is it an easy replacement for an older Hayward heater?Hayward designed the Universal H-Series as a drop-in replacement that works directly with Hayward plumbing adapters. The junction box mounts on either side and all service is from the front.
We'll email you back, usually the same business day. Or call (818) 818-6559 (Mon–Fri 8–5, Sat 8–4).
You are chatting with an AI assistant, not a person. It can be wrong: please double-check part numbers against your equipment label. By using this chat you agree that it is recorded and saved, that it is processed by our service providers, and that our team may read it or join. See our Privacy Policy. Need a person? or call (818) 818-6559.