The S360T2 is the 36 in. top mount model in Hayward's ProSeries Plus sand filters. It holds 700 lb of filter sand and Hayward lists a design flow rate of 130 GPM, which turns over 62,400 gallons in 8 hours.
The valve sits on top of the tank and is held by a flange clamp, so it can be turned to any angle to line up with the plumbing. A top diffuser spreads the water evenly over the sand, and the slotted laterals at the bottom fold up on a ball joint for service. The drain plug lets water out without losing sand.
This model comes with a 2 in. 6-position VariFlo valve.
Even flow through the sandAn integral top diffuser spreads incoming water over the whole sand bed.
Self-cleaning laterals360 degree slotted laterals for balanced flow and backwashing, on a folding ball joint for easy service.
Valve turns 360 degreesThe flange clamp lets the valve face any direction to simplify the plumbing.
Corrosion-proof tankOne-piece molded polymeric tank and base made for all-weather use.
Drains without losing sandMolded drain plug for winterizing and service.
Specs
Tank diameter36 in.
Effective filtration area6.50 sq ft
Design flow rate130 GPM
Turnover, 8 hours62,400 gallons
Turnover, 10 hours78,000 gallons
Sand required700 lb of No. 20 silica pool filter sand (0.45 to 0.55 mm)
Valve2 in. 6-position VariFlo valve
Maximum working pressure50 PSI
Performance range99 to 130 GPM
Size36 in. wide x 53 in. high
Weight, empty134 lb
Drain1-1/2 in.
TankMolded polymeric
Pressure gaugeIncluded
Warranty and installation
WarrantyHayward warranty: 3 years parts, 1 year labor. Claims go to Hayward.
InstallationProfessional installation available in LA and Ventura County
Questions
How much sand does it take?700 lb of No. 20 silica pool filter sand. Hayward recommends only that sand in this filter.
Does it come with a valve?Yes, a 2 in. 6-position VariFlo valve.
When do I backwash?When the pressure gauge reads 8 to 10 PSI above the clean starting pressure. Backwash until the waste water runs clear, about 2 minutes or less.
What pump flow is it made for?Hayward's design flow rate for the S360T2 is 130 GPM. The ProSeries Plus line covers 99 to 130 GPM.
We'll email you back, usually the same business day. Or call (818) 818-6559 (Mon–Fri 8–5, Sat 8–4).
You are chatting with an AI assistant, not a person. It can be wrong: please double-check part numbers against your equipment label. By using this chat you agree that it is recorded and saved, that it is processed by our service providers, and that our team may read it or join. See our Privacy Policy. Need a person? or call (818) 818-6559.