CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov
Hayward ProSeries 24 in. Top Mount Sand Filter with 2 in. Valve | W3S244T2
$779.00
Overview
The W3S244T2 is the 24 in. top mount model in Hayward's ProSeries sand filters. It holds 300 lb of filter sand and Hayward lists a design flow rate of 62 GPM, which turns over 29,760 gallons in 8 hours.
The valve sits on top of the tank and is held by a flange clamp, so it can be turned to any angle to line up with the plumbing. A top diffuser spreads the water evenly over the sand, and the slotted laterals at the bottom fold up on a ball joint for service. The drain plug lets water out without losing sand.
This model comes with a 2 in. 6-position VariFlo valve (SP071621).
Highlights
Even flow through the sandAn integral top diffuser spreads incoming water over the whole sand bed.
Self-cleaning laterals360 degree slotted laterals for balanced flow and backwashing, on a folding ball joint for easy service.
Valve turns 360 degreesThe flange clamp lets the valve face any direction to simplify the plumbing.
Corrosion-proof tankOne-piece molded polymeric tank and base made for all-weather use.
Drains without losing sandMolded drain plug for winterizing and service.
Specs
Tank diameter24 in.
Effective filtration area3.14 sq ft
Design flow rate62 GPM
Turnover, 8 hours29,760 gallons
Turnover, 10 hours37,200 gallons
Sand required300 lb of No. 20 silica pool filter sand (0.45 to 0.55 mm)
Valve2 in. 6-position VariFlo valve (SP071621)
Maximum working pressure50 PSI
Performance range30 to 120 GPM
Size24-1/2 in. wide x 42 in. high
Weight, empty46 lb
Drain1-1/2 in.
Side clearance18 in.
TankMolded polymeric
Pressure gaugeIncluded
Warranty and installation
WarrantyHayward warranty: 1 year parts. Claims go to Hayward.
InstallationProfessional installation available in LA and Ventura County
Questions
How much sand does it take?300 lb of No. 20 silica pool filter sand. Hayward recommends only that sand in this filter.
Does it come with a valve?Yes, a 2 in. 6-position VariFlo valve (SP071621).
When do I backwash?When the pressure gauge reads 8 to 10 PSI above the clean starting pressure. Backwash until the waste water runs clear, about 2 minutes or less.
What pump flow is it made for?Hayward's design flow rate for the W3S244T2 is 62 GPM. The ProSeries line covers 30 to 120 GPM.
We'll email you back, usually the same business day. Or call (818) 818-6559 (Mon–Fri 8–5, Sat 8–4).
You are chatting with an AI assistant, not a person. It can be wrong: please double-check part numbers against your equipment label. By using this chat you agree that it is recorded and saved, that it is processed by our service providers, and that our team may read it or join. See our Privacy Policy. Need a person? or call (818) 818-6559.