Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
Overview
The S210T is the 21 in. top mount model in Hayward's ProSeries sand filters, sized for above-ground pools and small in-ground pools. It holds 200 lb of filter sand and Hayward lists a design flow rate of 44 GPM, which turns over 21,120 gallons in 8 hours.
The valve sits on top of the tank and is held by a flange clamp, so it can be turned to any angle to line up with the plumbing. A top diffuser spreads the water evenly over the sand, and the slotted laterals at the bottom fold up on a ball joint for service. The drain plug lets water out without losing sand.
This model comes with a 1-1/2 in. 7-position VariFlo XL valve.
Other models in this series: 22 in., 1-1/2 in. valve (S220T), 22 in., 2 in. valve (S220T2), 24 in., 1-1/2 in. valve (S244T), 24 in., 2 in. valve (S244T2), 27 in., 1-1/2 in. valve (S270T), 27 in., 2 in. valve (S270T2), 30 in., 2 in. valve (S310T2), 16 in., 1-1/2 in. valve (S166T), 18 in., 1-1/2 in. valve (S180T).
