{"product_id":"hayward-ecoflo-street-sweep-elbow-2-in-efc3220sw","title":"Hayward EcoFlo Street Sweep 90-Degree Elbow - 2 in. Spigot x Socket | EFC3220SW","description":"\u003cp\u003eBetter flow, in a street-elbow design. The Hayward EcoFlo EFC3220SW is a genuine white 2 in. street sweep 90-degree elbow with two different ends: one spigot (street) end that slips into a 2 in. socket or union, and one socket (hub) end that a 2 in. pipe glues into. Because it is a street fitting, it connects directly to your union or fitting with no extra coupling and fits neatly into tight equipment-pad spaces. Instead of a hard, abrupt bend, its long-radius sweep guides water around the corner smoothly, reducing turbulence and head loss so your pump runs more efficiently. It works with the Hayward EcoFlo union (SPX3200UNKIT) on TriStar, EcoStar, and NorthStar pumps and lines up cleanly to SwimClear filters and Universal H-Series heaters.\u003c\/p\u003e\n\u003ch3\u003eWhat It Is For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreet-elbow design:\u003c\/strong\u003e One spigot end plus one socket end connects straight to a union or fitting — no extra coupling, and it fits where a hub-by-hub elbow will not.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficient sweep turn:\u003c\/strong\u003e The long-radius 90-degree curve reduces turbulence and head loss compared with a standard sharp elbow, which can save pump energy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect alignment:\u003c\/strong\u003e Connects an EcoStar or TriStar pump to a SwimClear filter or Universal H-Series heater cleanly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Hayward part:\u003c\/strong\u003e An exact-fit EcoFlo fitting, not a generic substitute.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Use It\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIdentify the two ends: the plain spigot (street) end inserts into a socket; the belled socket (hub) end accepts a pipe.\u003c\/li\u003e\n\u003cli\u003eSlip the spigot end into your 2 in. socket or the Hayward union connector; glue your 2 in. pipe into the socket end.\u003c\/li\u003e\n\u003cli\u003eSolvent-weld both joints with PVC primer and cement, keeping the elbow oriented so your plumbing routes cleanly.\u003c\/li\u003e\n\u003cli\u003eIf mating to the EcoFlo union, hand-tighten the union nut over its gasket — snug only, do not over-tighten.\u003c\/li\u003e\n\u003cli\u003ePrime the system, run the pump, and check the connections for leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe two ends are different: one spigot (street) end and one socket (hub) end — check which end mates to your union versus your pipe before gluing.\u003c\/li\u003e\n\u003cli\u003eIf you are connecting to the Hayward EcoFlo union, the union nut, connector, and gasket come in the SPX3200UNKIT kit, sold separately.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Hayward\u003c\/li\u003e\n\u003cli\u003ePart number: EFC3220SW\u003c\/li\u003e\n\u003cli\u003eType: EcoFlo street sweep 90-degree elbow\u003c\/li\u003e\n\u003cli\u003eSize: 2 in.\u003c\/li\u003e\n\u003cli\u003eEnd 1: spigot (street) end — inserts into a 2 in. socket \/ union\u003c\/li\u003e\n\u003cli\u003eEnd 2: socket (hub) end — accepts 2 in. pipe\u003c\/li\u003e\n\u003cli\u003eColor: White\u003c\/li\u003e\n\u003cli\u003eMaterial: PVC\u003c\/li\u003e\n\u003cli\u003eCompatible unions: Hayward SPX3200UNKIT (TriStar, EcoStar, NorthStar pumps); also SwimClear filters and Universal H-Series heaters\u003c\/li\u003e\n\u003cli\u003eGenuine Hayward replacement part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is this part?\u003c\/strong\u003e\u003cbr\u003eA genuine Hayward EcoFlo 2 in. street sweep 90-degree elbow that connects Hayward union equipment to your pool plumbing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are the two ends different?\u003c\/strong\u003e\u003cbr\u003eIt is a street elbow: one spigot (street) end slips into a socket, and the other is a socket (hub) that a pipe glues into. That lets it connect directly to a union or fitting without an extra coupling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does sweep mean?\u003c\/strong\u003e\u003cbr\u003eIt is a long-radius elbow — the gentle curve reduces turbulence and head loss compared with a standard sharp 90-degree fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it different from the EFC3225SW?\u003c\/strong\u003e\u003cbr\u003eThe EFC3225SW is a larger 2.5 in. socket-by-socket sweep union elbow. This EFC3220SW is a 2 in. street elbow with one spigot end and one socket end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include the union?\u003c\/strong\u003e\u003cbr\u003eNo — the union nut, connector, and gasket come in the SPX3200UNKIT kit, sold separately.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":54045220503852,"sku":"EFC3220SW","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/1943\/3260\/files\/efc3220sw.jpg?v=1788993121","url":"https:\/\/www.sospool.com\/products\/hayward-ecoflo-street-sweep-elbow-2-in-efc3220sw","provider":"SOS Pool \u0026 Spa Supplies","version":"1.0","type":"link"}