Find your parts diagram

HaywardCSPAXI11

Hayward C-Spa XI 11 kW Electric Spa Heater, 240V | CSPAXI11

11 kW Electric

Will it work for your pool?

Heat output11 kW (about 37,500 BTU/hr)
Power240V, 46 A
Breaker60 A
Water flow12 to 60 GPM
Connections1-1/2 in.
  • Hayward limited warranty. The terms are in the manual and on the warranty sheet packed with the heater.
  • Professional installation available in LA and Ventura County
Regular price $0.00
Regular price Sale price $0.00
Shipping calculated at checkout.

Available in our stores

This item is sold in store only. Stop by for pricing, availability and expert advice.

Chatsworth20600 Plummer Street
Chatsworth, CA 91311
(818) 818-6559
North Hollywood7224 Atoll Avenue
North Hollywood, CA 91605
(818) 765-4447

Have a question about this part?

CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov

Overview

The CSPAXI11 is Hayward's 11 kW, 240V electric spa heater from the C-Spa XI line. It is a small in-line heater, about 12 in. tall, that plumbs into the return line between the filter and the spa, so it fits under spa skirts and steps where a gas heater cannot go.

It has a stainless steel tank, an adjustable thermostat on the outside, a heater-on light, and a factory pressure switch that shuts the heater off when the pump stops.

It is an electric heater for spas and hot tubs, not a pool heater. It needs a dedicated 240V circuit: Hayward lists a 46 A draw and a 60 A breaker.

Highlights

Fits small spacesAbout 11-5/8 in. high x 6-1/4 in. wide x 6-5/8 in. deep. Installs outdoors or indoors with 6 in. clearance to combustible construction.
Stainless steel tankWith a threaded heating element that can be serviced.
Adjustable thermostatExternal dial with a positive off position and a dial lock.
Built-in protectionFactory pressure switch turns the heater off when the pump stops, plus a high-limit thermostat with reset.

Specs

Output11 kW, 37,532 BTU/hr
Voltage240V, single phase
Amp rating46 A
Breaker size60 A
Wire sizeNo. 6 copper for runs up to 50 ft (one gauge larger for each extra 50 ft)
Ground wireNo. 10 copper
Water connections1-1/2 in.
Minimum piping1-1/2 in. inside diameter
Water flow12 GPM minimum, 60 GPM maximum
Heating rate225 gallons per hour at a 20 degree F rise, 112 gallons per hour at a 40 degree F rise
TankStainless steel
Size11-5/8 in. high x 6-1/4 in. wide x 6-5/8 in. deep
LocationOutdoor or indoor, 6 in. minimum clearance to combustible construction
StandardConforms to UL 1261

Warranty and installation

WarrantyHayward limited warranty. The terms are in the manual and on the warranty sheet packed with the heater.
InstallationProfessional installation available in LA and Ventura County

Questions

Can I use it to heat a swimming pool?No. It is made for spas and hot tubs. Hayward rates it at 225 gallons per hour for a 20 degree F rise, which is far too little for a pool.
What electrical service does it need?240V, 46 A. Hayward lists a 60 A breaker and No. 6 copper wire for runs up to 50 ft.
Can I use it with a salt water or mineral spa?Hayward says the heater is designed for spa water from a municipal supply, and its warranty does not cover use with mineral, sea, salt or other non-potable water.
Where in the plumbing does it go?In the return line from the filter to the spa. Do not put a shutoff valve between the heater outlet and the spa.
What if my pump moves more than 60 GPM?Install an external bypass around the heater, as shown in the manual.
Is there a smaller model?Yes. The C-Spa XI also comes as a 5.5 kW, 240V heater (CSPAXI55).

Documents