Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
DiversiTech EcoPad 24 x 36 x 2 in. Plastic Equipment Pad | EP2436-2
Fits these models (2)
Shipping times are estimates, not guarantees.
Couldn't load pickup availability
Have a question about this part?
Ask about fit, specs or shipping and get an instant answer.
Goes with this part
CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov
The DiversiTech EcoPad (EP2436-2) is a 24 x 36 x 2 in. black plastic equipment pad for outdoor pool and HVAC equipment. It is injection-molded from about 98% recycled polypropylene, so it is lighter than a poured concrete pad and is resistant to UV and weather.
- Providing a level, drillable base for pool pumps, filters, heaters, or outdoor condensers whose footprint fits on a 24 x 36 in. pad.
- Replacing a poured concrete equipment pad with a lightweight recycled-plastic pad that can be set on compacted soil, gravel, or a hard surface.
- Genuine DiversiTech EcoPad, sold individually. This is the plastic EcoPad, not DiversiTech's heavier Black Pad (ACP24362).
- Part number: EP2436-2
- Size: 24 x 36 x 2 in.
- Shipping weight: 10 lb (DiversiTech catalog)
- Material: injection-molded polypropylene, about 98% recycled, UV inhibited
- Color: black
- Features: ribbed underside for strength and self-leveling support, textured top, drillable, size molded on the side
- Pack quantity: 1 pad
- Outdoor pool or HVAC equipment whose base fits on a 24 x 36 in. pad
- Compacted level soil, gravel, concrete, or asphalt as the supporting surface
- Place the pad on a compacted, level surface with the textured side up.
- Set the equipment on the pad and confirm the footprint fits with a stable overhang.
- If you need to fasten the unit, drill the pad and use a tapcon or similar fastener (1/4 in. x 1-1/4 in. is commonly recommended).
Note: Sold as a single 2 in. thick pad. Some local codes now call for 3 in. pads, so confirm code and the equipment footprint before you order. This is the EcoPad, not the ACP24362 Black Pad.