BWT F1RX Robotic Pool Cleaner
The BWT F1RX Robotic Pool Cleaners engineered to deliver complete pool coverage, including areas most robotic cleaners cannot handle. It is the only robotic cleaner designed to clean swimming pools with water levels as low as 7 inches, making it ideal for Baja shelves, tanning ledges, and shallow beach entries where traditional robotic cleaners typically fail. From deep end floors to shallow ledges, the F1RX is built to clean everything with water coverage, providing full-surface performance in one advanced system.
Designed for pools up to 40 feet, the F1RX combines intelligent navigation, high-performance filtration, and Bluetooth connectivity in a compact, energy-efficient platform. Its optimized cleaning path ensures thorough coverage regardless of pool shape or surface type, while its hyperfine double filtration system captures dust and fine debris for consistently clear water.
Warranty:
3 Years – Power Supply, Cable, Motor
1 Year – Plastic Parts, Brushes, Tracks, Filter
Advanced Cleaner & Filtration Performance
High-Capacity Suction System
Powered by advanced cleaner technology capable of up to 6,000 GPH suction, providing strong debris lifting and removal.
Hyperfine Double Filtration
Dual-layer hyperfine filtration captures fine dust and small particles to maintain clear, balanced water.
Optimized Surface Coverage
Effectively cleans floors, walls, and waterlines while maintaining traction on steep slopes and various surface finishes.
Smart Operation & Control
Bluetooth Connectivity
Allows remote control, cleaning cycle selection, and live notifications through a connected device.
Cleaning Cycle Options
Selectable cleaning programs of 1.5 hours, 2 hours, or 2.5 hours for flexible operation.
Compact, Energy-Efficient Design
Modern low-profile construction delivers efficient cleaning while operating at 150 watts.
Installation & Operating Guidelines
Power Supply Placement
Position the power supply at least 11.8 feet from the pool and a minimum of 12 cm above ground level. The power supply is not water resistant and must be protected from moisture and direct sunlight.
Cable Setup
Release and unroll the floating cable fully before use. Extend a cable length equal to the pool’s diagonal plus approximately two additional meters. Remove twists or coils prior to operation.
Pre-Operation Checks
Ensure no swimmers are in the pool and confirm filters are clean before placing the cleaner in the water.
Starting Procedure
After placing the cleaner in the pool and allowing it to settle on the floor, connect the power supply to a wall outlet and activate using the illuminated On/Off button. Operating the unit outside of water may cause severe damage and void warranty coverage.
Technical Specifications
Pool Size Capacity: Up to 40 feet
Cable Length: 59 feet
Cleaning Cycles: 1.5 hr, 2 hr, 2.5 hr
Filter Type: Hyperfine Double Filtration
Power Consumption: 150 watts
Dimensions: 15.5 x 14 x 8 inches
Weight: 13 lbs
The BWT F1RX combines ultra-shallow cleaning capability, high-powered suction performance, and intelligent operation to deliver complete robotic pool coverage across all pool zones, including areas typically missed by conventional robotic cleaners.
Questions & Answers
Have a Question?
Be the first to ask a question about this.