Marlig Fix-A-Leak Pool and Spa Leak Sealant | 32oz | FAL32

• Versatile and Concentrated Sealant: The Marlig FIX-A-LEAK FAL32 is a powerful, concentrated sealant designed to effectively address leaks in various materials, including concrete, fiberglass, PVC, and more.
• Effective for Pool Shells and Plumbing: This 32-ounce solution is highly effective for sealing leaks in pool shells and plumbing, capable of handling holes up to 1/8 inch in diameter, making it suitable for both minor and significant leaks.
• Durable and Long-Lasting Seal: Known for its ability to create a strong, durable seal, FIX-A-LEAK ensures a long-lasting repair, helping to maintain the integrity and functionality of your pool or plumbing system.
• Easy Application: The product is straightforward to use, requiring just one quart per pool up to 22,000 gallons, offering a convenient solution for pool owners looking to address leaks efficiently.
• Optimal Results with Proper Curing: For the best results, follow the specific application instructions and allow the sealant ample time to cure, ensuring a reliable and effective seal for your pool or plumbing system.

Suction Line Leaks:

Suction Leaks are usually known by air mixed with the water at the return fittings.
In most cases suction lines only leak water when the filter pump is shut off.
Normal Circulation will simply draw FIX-A-LEAK away from the leak and if the pump is shut off the material will simply not get to the leak. You must reverse the flow of water, to force the material through the leak under pressure. Preferably 5-10 psi. untill the leak has stopped. When this has been achieved, gradually increase pressure to 15-25 psi. to insure a proper seal.

Important:

After sealing a suction leak "it" is a must to leave suction off the repaired line for no less than 48 hrs.FIX-A-LEAK requires time to cure and harden.

Note: FIX-A-LEAK has been thoroughly field-tested under various weather conditions, and has proven to be effective in sealing leaks. FIX-A-LEAK is also an excellent preventative maintenance aid, as it coats all surfaces that it comes in contact with, it cuts down on formation of rust and corrosion.

Shake Well Before Using

1. Bypass FILTER MEDIA before adding FIX-A-LEAK to water.
   Sand filters: set filter valve to recirculate.
   Other types: remove cartridges DE elements from filter tank. Then proceed to circulate through empty tank.
2. With pump running, add FIX-A-LEAK slowly through skimmer or in front of any other suction intake.
3. After adding FIX-A-LEAK adjust suction to main drain. If this is not possible, the vacuum cleaner could be usedalternatively, simply by placing the vacuum in deepest part of pool and connect to normal vacuum connection. Set filter valve to normal vacuum position.
   
4. FIX-A-LEAK is very heavy and will sink to the lowest point rather quickly. It must be stirred back into suspension, either manually using a pool broom or mechnically with a automated pool cleaner every 4-6 hrs. during circulation of water.
5. Continue to recirculate water until the leak has stopped.
6. Mark level of water in pool and check for 2-3 days to determine if the leak has stopped.
7. After the leak has stopped and given the proper time to cure (24-48 hrs.) you may return to normal filtration.
   Sand Filters: Set filter valve to filter and resume normal operation. Backwash out unused FIX-A-LEAK as required.
   Other Types: Reinstall filter into tank and resume operation. Rinse out unsed FIX-A-LEAK from filter as required.
   Note: Never let cartridges of DE elements be left to dry before they are cleaned.
8. Treatment can be repeated if necessary