Aladdin O-Ring Kit For Pentair SuperFlo & SuperMax | GO-KIT78
Couldn't load pickup availability
CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov
Found In These Collections
The Aladdin GO-KIT78 O-Ring Kit offers a full set of replacement seals for Pentair SuperFlo and Sta-Rite SuperMax pumps, ensuring accurate resealing during maintenance or pump rebuilding. Each gasket and O-ring is crafted to match original Pentair dimensions, delivering OEM-style precision for the diffuser, seal plate, lid, and drain plug sealing points. The kit includes an AS-200 motor shaft seal and Magic Lube to ensure smooth assembly and long-term sealing performance. By eliminating air leaks and improving prime retention, the GO-KIT78 helps maintain strong hydraulic flow and extend pump service life under everyday filtration demands.
Highlights
-
All-In-One Seal Kit: Contains shaft seal, diffuser O-ring, lid O-ring, seal bracket O-ring, drain plug O-ring, and Magic Lube for comprehensive resealing.
-
OEM-Style Fitment: Matches Pentair part dimensions including 357255, 355030, 355619, and 192115 for reliable seating and performance.
-
Reduces Air Intrusion: Helps eliminate suction-side leaks to stabilize prime, strengthen suction, and optimize pump output.
-
Resilient Rubber Construction: Chlorine-resistant elastomers maintain elasticity and sealing strength through heat and pressure cycles.
-
Perfect for Maintenance Cycles: Ideal for proactive pump servicing, leak correction, or rebuilding SuperFlo and SuperMax units.
Includes
- (1) AS-200 Motor Seal
- (1) O-130 Drain Plug O-Ring - Replacement For 192115
- (1) O-150 Lid O-Ring - Replacement For 357255
- (1) O-395 Diffuser O-Ring - Replacement For 355030
- (1) O-465 Seal Bracket O-Ring - Replacement For 355619
- (1) Magic Lube
Compatibility
- Pentair SuperFlo Pumps
- Pentair Sta-Rite SuperMax Pumps
Additional Info
The Aladdin GO-KIT78 O-Ring Kit provides all essential seals needed to rebuild Pentair SuperFlo and Sta-Rite SuperMax pumps, including diffuser, lid, and seal plate O-rings, an AS-200 shaft seal, and Magic Lube. This FAQ helps SOSPool.com customers verify compatibility, understand installation steps, and know what to expect after placing an online order. The kit restores reliable pump priming and leak-free performance.
Compatibility Checks for Online Orders
Online customers often want confirmation that this kit includes the correct seals for their SuperFlo or SuperMax model.
How can I confirm the GO-KIT78 matches my pump before ordering?
Check your pump label for SuperFlo or SuperMax branding and verify references such as 357255 or 355030. If your unit uses these parts, the GO-KIT78 contains the correct seals.
Does this kit include everything needed for a full pump reseal?
Yes, the GO-KIT78 includes the AS-200 shaft seal, diffuser and lid O-rings, a seal bracket O-ring, drain plug O-ring, and Magic Lube.
Will replacing these seals help resolve priming or suction issues?
Yes, worn O-rings often cause air leaks that reduce suction strength. Installing the GO-KIT78 usually restores stable pump operation.
Installation and Setup After Delivery
This section guides SOSPool.com customers through installation steps once their kit arrives.
How do I install the GO-KIT78 during a pump rebuild?
Disassemble the pump, clean all sealing surfaces, and replace each O-ring with the matching size from the kit. Install the shaft seal carefully, ensuring the ceramic face stays clean.
What should I check after the pump is reassembled?
Confirm rapid priming, steady pressure, and absence of leaks around the lid and seal plate. Any signs of air entry may indicate improper seating of one of the O-rings.
How long do the O-rings typically last under normal conditions?
The elastomer materials resist chlorine, heat, and pressure. With routine maintenance, the seals provide long-term performance.
Shipping, Delivery, and Online Support
SOSPool.com customers often want clear expectations on delivery timelines and inspection steps.
How quickly does the GO-KIT78 ship when ordered online?
Orders typically ship promptly, with estimated delivery times displayed at checkout. Tracking updates allow you to follow each stage of shipment.
What should I inspect when the kit arrives?
Verify that each O-ring is flexible, undamaged, and properly sized. Check that the shaft seal and Magic Lube are included.
Should I order additional pump parts with the GO-KIT78?
Many online customers add impellers, pump lids, motors, or replacement cartridges to complete maintenance in a single shipment.
Questions & Answers
Have a Question?
-
Shaft seal size?
Hi John, the shaft seal in this kit is the AS-200, which is Aladdin's version of the standard "200" series mechanical seal (Pentair/PacFab equivalent 200). It fits the standard 5/8 inch motor shaft used on the SuperFlo and SuperMax pumps.
-
What size is o ring that fits on the shaft on pentair Superflo vs?
Hi John,
On the SuperFlo VS, the part that actually fits onto the motor shaft is the mechanical shaft seal, not an o-ring, and this kit includes it. It's the AS-200 (PS-200) shaft seal, which fits the standard 5/8" shaft on the SuperFlo and SuperFlo VS pumps.
If you were asking about the o-ring that seals around the seal plate area, that's the O-465 seal plate o-ring (Pentair 355619), also included in this kit and its about 8-1/8" in diameter.