Aiper Scuba X1 Pro Max All-in-One Cordless Pool Robot - Floor, Walls, Surface
Couldn't load pickup availability
CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov
Found In These Collections
Charging DockDrop it on the dock. No cable, no drying, no plug-in.
Then Cleans All of It. Ultrasonic sensors build a map of your pool on the first run. FlexiPath 2.0 then picks the path pattern that fits your shape: S-pattern, grid, Y-shape, edge, or descending. It climbs walls, scrubs the waterline, handles slopes and elevated ledges, and avoids ladders. Downward sensors keep it from driving off raised platforms.
- Floor, walls, waterline, and surface in one unit
- Handles slopes, elevated platforms, and California beach ledges
- Anti-fall detection on raised surfaces
- Climbs over stairs, avoids ladders, escapes obstacles
Full App Control. Auto mode reads debris load and adjusts suction on its own. Eco stretches runtime to 5 hours on the floor. Max runs full power for a deep clean. Pair the optional HydroComm Pro and you can switch modes, check battery, and recall the robot to the surface while it is still underwater.
- Auto, Eco, and Max power modes, switchable mid-cycle
- Schedule cleanings and get OTA updates through the app
- One-tap surface recall with HydroComm Pro (sold separately)
- Wi-Fi and Bluetooth, 28-day cleaning history
Both. The X1 Pro Max is the one Aiper Scuba model with a dedicated surface mode. It floats and skims leaves, pollen, and insects for up to 10 hours per charge, then can switch to floor, wall, and waterline cleaning. Other Scuba models (S1 Pro, V3, P1) clean underwater only.
In-ground pools up to 3,230 sq ft or 100 ft in length. Concrete, plaster, fiberglass, vinyl, and tile. It handles slopes, elevated platforms, and beach-entry ledges, and it is rated for salt pools up to 50,000 ppm.
The Scuba X1 Pro Max robot, wireless charging dock, DC charger, retrieval hook, extra 3 micron MicroMesh filter, manual, and quick start guide. The Aiper Caddy (for rolling the dock around) and the HydroComm Pro (underwater app control and water monitoring) are optional add-ons sold separately.
The Aiper app works over Wi-Fi and Bluetooth when the robot is on the surface. To send commands while it is submerged, such as switching modes or recalling it to the edge, you need the optional HydroComm Pro floating relay. Without it, you set the mode before the cycle and the robot surfaces on its own when done or when the battery is low.
Up to 5 hours of floor cleaning in Eco mode, about 3.5 hours in Max mode, or up to 10 hours in surface-only skimming mode. A full charge on the wireless dock takes about 4 hours.
The X1 Pro Max adds surface skimming, 9 motors instead of 4, 8,500 GPH instead of 6,600, 40 sensors instead of 26, and covers 3,230 sq ft instead of 2,150. Both share the 180 and 3 micron filtration and FlexiPath navigation. If your pool is under 2,150 sq ft and surface debris is not a daily problem, the X1 Pro is the lighter and lower-cost choice.
- Description
- Reviews
See It in Action
Aiper Scuba X1 Pro Max — Overview
Why Most Pool Robots Fall Short
Your Skimmer Is Still Doing Half the Work.
Standard robots clean the floor and maybe the walls. Leaves, pollen, and bugs keep collecting on the surface until you net them off by hand. The Scuba X1 Pro Max is the one Aiper model that skims the surface and cleans everything below it in the same machine.
◆
No More NettingSurface mode runs up to 10 hours, pulling in floating leaves and pollen before they sink.
◑
No Missed Corners40 sensors map the pool and FlexiPath 2.0 plans full coverage, including slopes and ledges.
▶
No Cord, No Plug-InTruly cordless. Set it on the wireless dock and it charges itself for the next run.
9Brushless MotorsDual-jet drive for the strongest suction in the Aiper lineup
WirelessCharging DockDrop it on the dock. No cable, no drying, no plug-in.
3μmUltra-Fine FilterMicroMesh captures algae and fine dust, 5L top-load basket
8500 GPHSuction Power
3230 ft²Max Pool Size
10 hrSurface Skimming Runtime
40Onboard Sensors
FlexiPath 2.0 and OmniSense+ 2.0
Maps the Pool.Then Cleans All of It. Ultrasonic sensors build a map of your pool on the first run. FlexiPath 2.0 then picks the path pattern that fits your shape: S-pattern, grid, Y-shape, edge, or descending. It climbs walls, scrubs the waterline, handles slopes and elevated ledges, and avoids ladders. Downward sensors keep it from driving off raised platforms.
- Floor, walls, waterline, and surface in one unit
- Handles slopes, elevated platforms, and California beach ledges
- Anti-fall detection on raised surfaces
- Climbs over stairs, avoids ladders, escapes obstacles
Aiper App and HydroComm
Three Power Modes.Full App Control. Auto mode reads debris load and adjusts suction on its own. Eco stretches runtime to 5 hours on the floor. Max runs full power for a deep clean. Pair the optional HydroComm Pro and you can switch modes, check battery, and recall the robot to the surface while it is still underwater.
- Auto, Eco, and Max power modes, switchable mid-cycle
- Schedule cleanings and get OTA updates through the app
- One-tap surface recall with HydroComm Pro (sold separately)
- Wi-Fi and Bluetooth, 28-day cleaning history
The Aiper Caddy and HydroComm Pro are sold separately.
Key Features
◆
Industry-Leading Suction8,500 GPH from nine brushless motors, a 3 cm wide intake, and a short flow path. Picks up leaves, sand, hair, and insects in one pass.
▶
Dual Filtration180 micron basket for leaves and rocks, 3 micron MicroMesh for algae and dust. Top-load 5 liter capacity, replaceable.
○
All-Day BatteryUp to 5 hours on the floor or 10 hours skimming the surface. Recharges in 4 hours on the wireless dock.
⚙
Built for Salt and ChlorineRated to 50,000 ppm salinity and 40 ppm chlorine, IPX8 sealed, designed for a 10-year lifespan. 3-year warranty on the robot.
How It Works
1
Charge on the DockSet the robot on the wireless dock. A full charge takes about 4 hours.
2
Pick a ModeChoose surface, floor, wall, waterline, or all-in-one from the robot or the app.
3
Drop It InIt maps the pool, plans its path, and cleans. Nothing to plug in or tether.
4
Recall and RinseTap recall in the app, lift it out, rinse the filter, and set it back on the dock.
Specifications
Aiper · AIV-20-1000
Brand
Aiper
Model / SKU
AIV-20-1000
Mfg Part
X9-US
Pool Size
Up to 3,230 sq ft, 100 ft length
Coverage
Surface, Floor, Walls, Waterline, Slopes, Ledges
Suction
8,500 GPH (32,000 LPH)
Battery
Up to 5 hr floor, up to 10 hr surface
Warranty
3 Years Robot, 6 Months Charger and Dock
Robot Weight
13.9 lbs
Robot Size
19.1 × 12.6 × 8.3 in
Got Questions?Frequently Asked
Both. The X1 Pro Max is the one Aiper Scuba model with a dedicated surface mode. It floats and skims leaves, pollen, and insects for up to 10 hours per charge, then can switch to floor, wall, and waterline cleaning. Other Scuba models (S1 Pro, V3, P1) clean underwater only.
In-ground pools up to 3,230 sq ft or 100 ft in length. Concrete, plaster, fiberglass, vinyl, and tile. It handles slopes, elevated platforms, and beach-entry ledges, and it is rated for salt pools up to 50,000 ppm.
The Scuba X1 Pro Max robot, wireless charging dock, DC charger, retrieval hook, extra 3 micron MicroMesh filter, manual, and quick start guide. The Aiper Caddy (for rolling the dock around) and the HydroComm Pro (underwater app control and water monitoring) are optional add-ons sold separately.
The Aiper app works over Wi-Fi and Bluetooth when the robot is on the surface. To send commands while it is submerged, such as switching modes or recalling it to the edge, you need the optional HydroComm Pro floating relay. Without it, you set the mode before the cycle and the robot surfaces on its own when done or when the battery is low.
Up to 5 hours of floor cleaning in Eco mode, about 3.5 hours in Max mode, or up to 10 hours in surface-only skimming mode. A full charge on the wireless dock takes about 4 hours.
The X1 Pro Max adds surface skimming, 9 motors instead of 4, 8,500 GPH instead of 6,600, 40 sensors instead of 26, and covers 3,230 sq ft instead of 2,150. Both share the 180 and 3 micron filtration and FlexiPath navigation. If your pool is under 2,150 sq ft and surface debris is not a daily problem, the X1 Pro is the lighter and lower-cost choice.
◆ 8,500 GPHStrongest in Aiper lineup ▶ Skims + CleansSurface to floor ○ Wireless DockNo cable, no drying ⚙ 3 Micron FilterAlgae and fine dust ★ 3-Year WarrantyOn the robotQuestions & Answers
Have a Question?
Be the first to ask a question about this.